METER – CND2000 OEM Conductivity meter with built- in temperature compensation.

The METER-CND2000 board is designed to perform conductivity measurement up to 2000 uS/cm. If used properly, it will eliminate the need for expensive conductivity meter, which would otherwise be needed to carry out the same tasks.

The METER-CND2000  is easy to install, setup and operate. If you want to do professional water conductivity measurement related functions, The METER-CND2000 offers the features you need. Wall mounted easily via two mounting holes.

Simply connect the the meter to 11-18VDC or VAC, connect your conductivity cell to the input and the meter will display your conductivity units.

Shown on the right with three positions power switch; momentary, off and on.

On the right picture of METER-CND2000 back side, with wall mounting holes (fit any US industrial standard outlet). 

* For our big selection of conductivity cells click hear

     1. 0-200 uS/cm fine adjustment

     2. range select: 

        0-200 uS/cm

        0-2000 uS/cm

        0-7 mS/cm

     3. 0-2000 uS/cm fine adjustment

     4. Multi-positions power switch

     5. LED power indicator

     6. Zero adjustment

     7. Calibration adjustment

     8. Output via BNC connector

     9. Input via mini-DIN6 connector

On the left picture of the METER-CN2000 meter with conductivity cup (CUPER-CC2) 

METER-CND2000 Features

• Built-in power LED indicator.

• Zero output multi-turn trimmer adjustment.

• Calibration multi-turn trimmer adjustment.

• Multi positions power switch (shipped standard push button power switch)

• Power via 11-18V DC or AC

• Built in temperature compensation

• Accommodate any EID conductivity cell K=1 with 10K thermistor.

• Can be customized to accommodate your requirement.

• LCD display

• Built in oscillator (cell driver)

On board multi-turn trimmers facilitates precise calibration of output readings

Specifications

• Input                                      Rated to 0-2000uS/cm

• PCB material                             FR4

• Input Filter                               L.P.F. 60Hz

• Max power consumption              0.5W

• Temp. Compensation:                set for 10K ohms thermistor

• Storage temperature                  40 - 70   [F]

• Operating temperature                32 - 140 [F] (0 to 60°C) @ 95% RH

• Low board DC voltage                 9 [V]

• Power source                            11-18VDC or VAC

• Power indicator                          LED Red

• Adjustment                               Via trimmers

• Mounting                                  Wall mount via two mounting back holes

• Manufacture                             100% in USA

Pricing 

* Prices and colors are subject to change without notice. 

   Additional 10% discount with student ID, USA only.

AMPER-CND2000  Conductivity meter push button power switch

EID-METER-CND-PUSH

$479.00

AMPER-CNDS  Conductivity meter with 3 positions power switch

EID-METER-CND-3SWT

$499.00

AMPER-CND2000  Conductivity meter push button power switch, board only (PCB)

EID-METER-CND-PUSH-PCB

$279.00

AMPER-CNDS  Conductivity meter with 3 positions power switch PCB only, board only (PCB)

EID-METER-CND-3SET-PCB

$199.00

  ^•